rsyslog (8.4.2-1+devuan1u2~13.gbpb9e5a4) UNRELEASED; urgency=medium

  ** SNAPSHOT build @b9e5a4e60357c77139ed4cdf7e2cc65c17fbd8f7 **

  * Initial Devuanisation
  * add libgcrypt20-dev dependency (needed for gnutls)
  * Update changelog for 8.4.2-1+devuan1u2~1.gbpeb3da2 release
  * Add new quilt patch to fix broken tests
  * Update changelog for 8.4.2-1+devuan1u2~11.gbpab56b5 release
  * add 0005-Fix-hung-process-in-testsuite to series
  * Update changelog for 8.4.2-1+devuan1u2~12.gbp3fe7d7 release
  * move rules into set of valgrind enabled tests

 -- Daniel Reurich <daniel@centurion.net.nz>  Fri, 23 Dec 2016 07:49:03 +1300

rsyslog (8.4.2-1+deb8u2) jessie; urgency=medium

  * Fix crash in imfile module when using inotify mode.
    Patch cherry-picked from upstream Git. (Closes: #770998)
  * Prevent a segfault in dynafile creation.
    Patch cherry-picked from upstream Git. (Closes: #807908)

 -- Michael Biebl <biebl@debian.org>  Mon, 14 Dec 2015 13:34:01 +0100

rsyslog (8.4.2-1+deb8u1) jessie; urgency=medium

  * Disable transactions in ompgsql as they were not working properly.
    Patch cherry-picked from upstream Git. (Closes: #788183)

 -- Michael Biebl <biebl@debian.org>  Sat, 29 Aug 2015 13:52:34 +0200

rsyslog (8.4.2-1) unstable; urgency=high

  * New upstream release.
    - CVE-2014-3683: The fix for CVE-2014-3634 incomplete. It did not cover
      cases where PRI values > MAX_INT caused integer overflows resulting in
      negative values.
  * Urgency high for the security fix.

 -- Michael Biebl <biebl@debian.org>  Thu, 02 Oct 2014 15:27:25 +0200

rsyslog (8.4.1-1) unstable; urgency=high

  * New upstream release.
    - CVE-2014-3634: Fix remote syslog vulnerability due to improper
      handling of invalid PRI values.
  * Drop patches which have been merged upstream.
  * Urgency high for the security fix.

 -- Michael Biebl <biebl@debian.org>  Tue, 30 Sep 2014 12:35:33 +0200

rsyslog (8.4.0-2) unstable; urgency=medium

  * Tweak rsyslog systemd service file. Add Documentation field and restart
    the rsyslogd daemon on failures.
  * Cherry-pick upstream patch to fix build failures on platforms without
    atomic instructions.

 -- Michael Biebl <biebl@debian.org>  Wed, 20 Aug 2014 19:36:33 +0200

rsyslog (8.4.0-1) unstable; urgency=medium

  * New upstream release.
  * Update patches:
    - Refresh 0001-Don-t-create-a-database.patch.
    - Drop 0002-Fix-pidfile-location.patch, merged upstream.
  * Add --disable-generate-man-pages to configure flags to avoid a build
    dependency on python-docutils. We don't ship the generated man pages
    anyway.
  * Add support for external message modification modules which are bound via
    the new native mmexternal module.

 -- Michael Biebl <biebl@debian.org>  Mon, 18 Aug 2014 18:28:20 +0200

rsyslog (8.2.2-5) unstable; urgency=medium

  * Make sure to actually only create the temporary syslog.service symlink on
    upgrades and avoid the usage of readlink.

 -- Michael Biebl <biebl@debian.org>  Mon, 18 Aug 2014 02:43:31 +0200

rsyslog (8.2.2-4) unstable; urgency=medium

  * Fix wheezy → jessie upgrade failure when running under systemd due to the
    syslog.service symlink temporarily being missing.

 -- Michael Biebl <biebl@debian.org>  Mon, 18 Aug 2014 00:39:03 +0200

rsyslog (8.2.2-3) unstable; urgency=low

  * Upload to unstable.

 -- Michael Biebl <biebl@debian.org>  Sun, 29 Jun 2014 14:40:56 +0200

rsyslog (8.2.2-2) experimental; urgency=medium

  * Merge changes from unstable branch.

 -- Michael Biebl <biebl@debian.org>  Mon, 23 Jun 2014 13:52:12 +0200

rsyslog (8.2.2-1) experimental; urgency=medium

  * New major upstream release.
    - Rewritten core engine providing higher performance and better
      scalability with complex configurations.
    - Simplified script execution.
    - Global variable support.
    - Output part was revamped completely and required changes to all output
      modules.
    - Support for external plugins which can be written in any language.
  * Switch watch file to track v8 stable branch.
  * Update Build-Depends:
    - Bump librelp-dev to (>= 1.2.5).
    - Bump liblogging-stdlog-dev to (>= 1.0.3).
    - Bump liblognorm-dev to (>= 1.0.0).
    - Drop libee-dev.
  * Drop the omruleset module which has been deprecated and replaced by the
    much more efficient RainerScript "call" statement.
  * Remove the rsyslog-doc package which is now built from a separate source
    package.
  * Fix pidfile location. The pidfile should be stored in /var/run, not /etc.

 -- Michael Biebl <biebl@debian.org>  Mon, 09 Jun 2014 21:16:19 +0200

rsyslog (7.6.3-3) unstable; urgency=medium

  * Build against libgnutls28-dev. (Closes: #752304)
  * Use canonical URIs for Vcs-* fields.

 -- Michael Biebl <biebl@debian.org>  Mon, 23 Jun 2014 13:44:55 +0200

rsyslog (7.6.3-2) unstable; urgency=medium

  * Update Build-Depends:
    - Bump librelp-dev to (>= 1.2.5).
  * Build omelasticsearch module which provides support for logging to an
    Elasticsearch server. Split that module into a separate package called
    rsyslog-elasticsearch. (Closes: #744951)

 -- Michael Biebl <biebl@debian.org>  Fri, 16 May 2014 22:37:05 +0200

rsyslog (7.6.3-1) unstable; urgency=medium

  * New upstream release.
    - Fixes ompipe to properly handle retries and not cause unnecessary
      suspension messages. (Closes: #742113)
  * Update watch file, track v7 stable branch.

 -- Michael Biebl <biebl@debian.org>  Fri, 28 Mar 2014 12:36:45 +0100

rsyslog (7.6.2-1) unstable; urgency=medium

  * New upstream release.
  * Update patches.
  * Update Build-Depends:
    - Bump librelp-dev to (>= 1.2.4).
    - Add liblogging-stdlog-dev (>= 1.0.1).
  * Fix typo in rsyslog.postrm: dissappear → disappear
  * Drop useless "exit 0" from maintainer scripts.
  * Enable and install the mmutf8fix, mmpstrucdata and mmsequence message
    modification modules.
  * Stop installing debian/sample.conf. Upstream ships a more up-to-date
    example configuration file.

 -- Michael Biebl <biebl@debian.org>  Mon, 17 Mar 2014 17:26:08 +0100

rsyslog (7.4.8-1) unstable; urgency=medium

  [ Michael Biebl ]
  * New upstream release.
  * Update Build-Depends:
    - Bump libestr-dev to (>= 0.1.9).
    - Tighten liblognorm-dev to (<< 1.0.0).
    - Replace libjson0-dev with libjson-c-dev, we no longer need the
      transitional package.
  * Bump Standards-Version to 3.9.5. No further changes.

  [ Daniel Pocock ]
  * Make template parameter not mandatory in mongodb output plugin. Patch
    cherry-picked from upstream Git. (Closes: #740869, #721277)
  * Ensure JSON templates are NUL terminated. Patch cherry-picked from
    upstream Git.

 -- Michael Biebl <biebl@debian.org>  Tue, 11 Mar 2014 19:52:49 +0100

rsyslog (7.4.4-1) unstable; urgency=low

  * New upstream release.

 -- Michael Biebl <biebl@debian.org>  Tue, 03 Sep 2013 22:42:49 +0200

rsyslog (7.4.3-1) unstable; urgency=low

  * New upstream release.

 -- Michael Biebl <biebl@debian.org>  Tue, 23 Jul 2013 01:01:40 +0200

rsyslog (7.4.2-1) unstable; urgency=low

  * New upstream release.

 -- Michael Biebl <biebl@debian.org>  Sat, 06 Jul 2013 00:14:19 +0200

rsyslog (7.4.1-3) unstable; urgency=low

  * Bump Build-Depends on dh-systemd to (>= 1.4) to ensure we have a recent
    enough version of init-system-helpers which properly deals with a missing
    state directory. (Closes: #714265)

 -- Michael Biebl <biebl@debian.org>  Thu, 27 Jun 2013 19:21:04 +0200

rsyslog (7.4.1-2) unstable; urgency=low

  * Use dh-systemd to setup the systemd service properly.

 -- Michael Biebl <biebl@debian.org>  Wed, 26 Jun 2013 21:13:33 +0200

rsyslog (7.4.1-1) unstable; urgency=low

  * New upstream release.

 -- Michael Biebl <biebl@debian.org>  Mon, 17 Jun 2013 23:38:51 +0200

rsyslog (7.4.0-1) unstable; urgency=low

  * New upstream release.

 -- Michael Biebl <biebl@debian.org>  Thu, 06 Jun 2013 18:51:11 +0200

rsyslog (7.3.15-1) unstable; urgency=low

  * New upstream release.

 -- Michael Biebl <biebl@debian.org>  Wed, 15 May 2013 18:21:02 +0200

rsyslog (7.3.14-2) unstable; urgency=low

  * Upload to unstable.

 -- Michael Biebl <biebl@debian.org>  Fri, 10 May 2013 01:41:23 +0200

rsyslog (7.3.14-1) experimental; urgency=low

  * New upstream release.
  * Remove 02-fix-non-libgcrypt-build.patch, merged upstream.

 -- Michael Biebl <biebl@debian.org>  Mon, 06 May 2013 23:44:17 +0200

rsyslog (7.3.12-3) experimental; urgency=low

  * Only build and install the imkmsg module on Linux.

 -- Michael Biebl <biebl@debian.org>  Fri, 26 Apr 2013 16:46:19 +0200

rsyslog (7.3.12-2) experimental; urgency=low

  * Fix build when libgcrypt support is disabled to not pick up an unnecessary
    libgcrypt dependency.

 -- Michael Biebl <biebl@debian.org>  Thu, 25 Apr 2013 23:44:03 +0200

rsyslog (7.3.12-1) experimental; urgency=low

  * New upstream release.
  * Disable log file encryption support for now.

 -- Michael Biebl <biebl@debian.org>  Thu, 25 Apr 2013 15:14:37 +0200

rsyslog (7.3.10-1) experimental; urgency=low

  * New upstream release.
  * Bump Build-Depends on librelp-dev to (>= 1.0.3).

 -- Michael Biebl <biebl@debian.org>  Wed, 10 Apr 2013 12:31:15 +0200

rsyslog (7.3.9-1) experimental; urgency=low

  * New upstream release.
  * Remove patches which have been applied upstream.
  * Bump Build-Depends on libestr-dev to (>= 0.1.5).

 -- Michael Biebl <biebl@debian.org>  Wed, 27 Mar 2013 13:14:44 +0100

rsyslog (7.3.8-4) experimental; urgency=low

  * Add Build-Depends on bison so we can build twice in a row. "make clean"
    removes the generated grammar/grammer.[ch].
  * Another patch to fix build failures on architectures where prctl is not
    available. (Closes: #703429)

 -- Michael Biebl <biebl@debian.org>  Thu, 21 Mar 2013 16:45:17 +0100

rsyslog (7.3.8-3) experimental; urgency=low

  * The previous fix was incomplete. Cherry-pick another upstream patch to fix
    the build failure on non-Linux. (Closes: #703429)

 -- Michael Biebl <biebl@debian.org>  Wed, 20 Mar 2013 11:44:10 +0100

rsyslog (7.3.8-2) experimental; urgency=low

  * Cherry pick patch from upstream which fixes the build on architectures
    which don't have SYS_gettid. (Closes: #703429)

 -- Michael Biebl <biebl@debian.org>  Tue, 19 Mar 2013 16:40:58 +0100

rsyslog (7.3.8-1) experimental; urgency=low

  * New upstream development release from the v7-devel branch.
  * Update watch file to track development releases.
  * The imrelp module now properly supports listening on IPv4 resp. IPv6 only.
    This requires librelp >= 1.0.2, so bump the Build-Depends accordingly.
    (Closes: #649355)
  * Enable the mmanon module which adds support for anonymizing IPv4
    addresses.

 -- Michael Biebl <biebl@debian.org>  Mon, 18 Mar 2013 16:21:35 +0100

rsyslog (7.2.6-1) experimental; urgency=low

  * New upstream release.
  * Bump Standards-Version to 3.9.4. No further changes.

 -- Michael Biebl <biebl@debian.org>  Tue, 05 Mar 2013 17:36:18 +0100

rsyslog (7.2.5-1) experimental; urgency=low

  * New upstream release.

 -- Michael Biebl <biebl@debian.org>  Wed, 09 Jan 2013 00:04:39 +0100

rsyslog (7.2.4-1) experimental; urgency=low

  * New upstream release.

 -- Michael Biebl <biebl@debian.org>  Fri, 07 Dec 2012 16:01:00 +0100

rsyslog (7.2.3-2) experimental; urgency=low

  * Fix permissions of the spool/work directory. (Closes: #693099)
  * Suggest rsyslog-mongodb.

 -- Michael Biebl <biebl@debian.org>  Wed, 28 Nov 2012 22:16:33 +0100

rsyslog (7.2.3-1) experimental; urgency=low

  * New upstream release.
  * Stop providing static start and stop priorities for dh_installinit. Those
    are no longer tested and we rely on the dependency information in the LSB
    header now to get a correct ordering when being run under sysvinit.

 -- Michael Biebl <biebl@debian.org>  Wed, 21 Nov 2012 17:51:27 +0100

rsyslog (7.2.2-1) experimental; urgency=low

  * New upstream release.
  * Drop patches which have been merged upstream.

 -- Michael Biebl <biebl@debian.org>  Fri, 16 Nov 2012 17:51:59 +0100

rsyslog (7.2.1-2) experimental; urgency=low

  * Disable imptcp on non-Linux plattforms as this module is Linux-specific.
    Making it available everywhere would require more extensive porting work.
  * debian/patches/02-imkmsg-includes.patch: Don't include <sys/klog.h> on
    non-Linux plattforms.
  * debian/patches/03-sysinfo.patch: Getting the uptime via sysinfo() is
    Linux-specific, so only use that on architectures supporting it.
  * Use dh-autoreconf to update the build system.
  * Thanks Guillem Jover for the patches to make rsyslog compile on non-Linux.
    (Closes: #692992)

 -- Michael Biebl <biebl@debian.org>  Tue, 13 Nov 2012 22:56:58 +0100

rsyslog (7.2.1-1) experimental; urgency=low

  * New upstream release.

 -- Michael Biebl <biebl@debian.org>  Mon, 29 Oct 2012 16:30:14 +0100

rsyslog (7.2.0-1) experimental; urgency=low

  * New upstream release.
    - Support for BSD-style blocks has been removed and the rsyslog.conf
      man page was updated accordingly. (Closes: #585536)
    - Fixes immark documentation wrt $MarkMessagePeriod. (Closes: #605831)
    - No longer requires libgcrypt with newer GnuTLS versions.
      (Closes: #638658)
  * Track stable releases again.
  * Remove unnecessary duplication from the init script and also drop the -c
    compatibility mode option.

 -- Michael Biebl <biebl@debian.org>  Tue, 23 Oct 2012 01:03:54 +0200

rsyslog (7.1.12-1) experimental; urgency=low

  * New major upstream release from the v7 beta branch. (Closes: #645640)
    - Greatly improved configuration language and execution engine.
    - Full support for structured logging and project lumberjack / CEE.
    - More plugins - like support for MongoDB or the kernel's new structured
      logging system.
    - Higher performance - optimizations for script-based filters, enhanced
      multithreaded TCP input plugin, DNS cache and more.
  * Update watch file to track beta releases.
  * Drop patches which have been merged upstream.
  * Update Build-Depends:
    - Add libestr-dev, libee-dev, libjson0-dev and uuid-dev.
    - Bump librelp-dev to (>= 1.0.1).
  * Build imkmsg module which provides support for reading structured kernel
    log messages.
  * Build imptcp module which provides less features then imtcp but is quite a
    bit faster.
  * Build message modification modules mmjsonparse and mmnormalize which
    provide functionality related to structured logging/lumberjack/CEE. This
    requires liblognorm.
  * Build ommongodb module which provides support for logging to a MongoDB
    database. Split that module into a separate package called
    rsyslog-mongodb.
  * Use --list-missing to show uninstalled files.
  * Remove upgrade code from rsyslog.postinst which is no longer necessary.
  * Remove the -c compatibility mode option from rsyslog.default. This option
    has been obsoleted upstream. (Closes: #598713)

 -- Michael Biebl <biebl@debian.org>  Sun, 21 Oct 2012 22:56:11 +0200

rsyslog (5.8.11-3) unstable; urgency=low

  * debian/patches/04-systemd_journal.patch: The journal has replaced
    systemd-kmsg-syslogd and systemd-stdout-bridge. Stopping a non-existing
    service will generate an error in newer versions of systemd, so remove
    that from ExecStartPre.

 -- Michael Biebl <biebl@debian.org>  Tue, 05 Mar 2013 23:06:57 +0100

rsyslog (5.8.11-2) unstable; urgency=low

  * Disable omstdout module again. Upstream doesn't consider it viable for
    production use but mainly for the internal testbench.
  * debian/patches/03-fix_relp_dns_resolution.patch: When using RELP for
    remote logging, correctly resolve the client hostname if the fromhost
    property contains the client IP. (Closes: #682529)
    Thanks to Apollon Oikonomopoulos for the patch.

 -- Michael Biebl <biebl@debian.org>  Wed, 26 Sep 2012 20:36:09 +0200

rsyslog (5.8.11-1) unstable; urgency=low

  * New upstream release.
  * Enable and install omuxsock and omstdout module.

 -- Michael Biebl <biebl@debian.org>  Fri, 04 May 2012 22:38:00 +0200

rsyslog (5.8.10-1) unstable; urgency=low

  * New upstream release.

 -- Michael Biebl <biebl@debian.org>  Thu, 05 Apr 2012 18:46:00 +0200

rsyslog (5.8.9-1) unstable; urgency=low

  * New upstream release.

 -- Michael Biebl <biebl@debian.org>  Thu, 15 Mar 2012 13:38:35 +0100

rsyslog (5.8.8-1) unstable; urgency=low

  * New upstream release.
    - Fix imuxsock to not truncate parts of the received message if it
      did not contain a proper date. (Closes: #654429)
    - Fix imuxsock example in rsyslog.conf(5) man page. (Closes: #655846)
  * Fix versioned Build-Depends on dpkg-dev. The buildflags.mk snippet was
    added in version 1.16.1, not 1.6.1. (Closes: #654894)
  * Update watch file. Check download page for stable releases.
  * Strip debian/tmp/ from .install files.
  * Install tmpfiles.d snippet to create /dev/xconsole when running under
    systemd. (Closes: #634978)
  * debian/patches/02-path_max.patch
    - Don't rely on PATH_MAX being defined. Patch cherry-picked from upstream
      Git. (Closes: #651529)
  * debian/rsyslog.init
    - Use --exec instead of --name for start-stop-daemon. This is more
      reliable and works better on GNU/Hurd. (Closes: #652575)
    - Use /run/xconsole and a symlink /dev/xconsole on non-Linux systems.
  * debian/rsyslog.default
    - Update comments regarding available command line switches. Remove
      deprecated options.
  * debian/rsyslog.links
    - Install syslog.service alias so rsyslog is properly socket activated
      with newer versions of systemd.
  * debian/copyright
    - Use maschine-readable copyright format 1.0.
    - Most parts of rsyslog have been relicensed under Apache license 2.0.
  * Bump Standards-Version to 3.9.3.
  * debian/rsyslog.conf
    - Set $WorkDirectory to /var/spool/rsyslog, which is used for spool and
      state files. When not configured it defaults to '/', which is
      undesirable. (LP: #918947, Closes: #656535)
  * debian/rsyslog.dirs
    - Add /var/spool/rsyslog/.

 -- Michael Biebl <biebl@debian.org>  Wed, 07 Mar 2012 00:42:56 +0100

rsyslog (5.8.6-1) unstable; urgency=low

  * New upstream release.
    - Fix regression in imuxsock to ignore message-provided timestamp by
      default which broke high precision timestamps. (Closes: #638147)
  * debian/control:
    - Wrap (build-)dependencies.
  * Enable default hardening options from dpkg-buildflags. (Closes: #644303)
    - Use buildflags.mk snippet in debian/rules.
    - Add Build-Depends on dpkg-dev (>= 1.6.1).

 -- Michael Biebl <biebl@debian.org>  Wed, 02 Nov 2011 23:31:41 +0100

rsyslog (5.8.5-1) unstable; urgency=low

  * New upstream release.

 -- Michael Biebl <biebl@debian.org>  Thu, 01 Sep 2011 23:29:45 +0200

rsyslog (5.8.4-1) unstable; urgency=low

  * New upstream release.

 -- Michael Biebl <biebl@debian.org>  Tue, 30 Aug 2011 23:58:11 +0200

rsyslog (5.8.3-1) unstable; urgency=low

  * New upstream release.
  * debian/rsyslog.conf: Use new ":omusrmsg:*" syntax (write to all) for
    *.emerg messages in preparation for future config format changes.

 -- Michael Biebl <biebl@debian.org>  Mon, 11 Jul 2011 12:33:27 +0200

rsyslog (5.8.2-2) unstable; urgency=low

  * Transition to /run/sendsigs.omit.d. (Closes: #633036)
    - Use /run/sendsigs.omit.d/rsyslog in debian/rsyslog.init.
    - Add Depends on initscripts (>= 2.88dsf-13.3) to ensure /run is usable.
    - Remove /lib/init/rw/sendsigs.omit.d/rsyslog on upgrades.

 -- Michael Biebl <biebl@debian.org>  Fri, 08 Jul 2011 01:36:20 +0200

rsyslog (5.8.2-1) unstable; urgency=low

  * New upstream release.

 -- Michael Biebl <biebl@debian.org>  Tue, 21 Jun 2011 16:26:54 +0200

rsyslog (5.8.1-1) unstable; urgency=low

  * New upstream release.
  * Bump Standards-Version to 3.9.2. No further changes.
  * Enable and install impstats module. (Closes: #620114)
  * Update logcheck rule. (Closes: #616659)
  * debian/rsyslog.init: Set correct compat level (5).
  * The way rsyslog processes SIGHUP has changed. It no longer does a reload
    of its configuration, but simply closes all open files. To apply a changed
    configuration, rsyslogd needs to be restarted now.
    - Drop "reload" action from debian/rsyslog.init, map "force-reload" to
      "restart". (Closes: #580897)
    - Add "rotate" action to debian/rsyslog.init which sends SIGHUP to
      rsyslogd. Use that in debian/rsyslog.logrotate. (Closes: #626365)
    - Update debian/rsyslog-mysql.postinst and rsyslog-pgsql.postinst to use
      restart instead of reload.
    - Add a NEWS file explaining the changed SIGHUP handling.

 -- Michael Biebl <biebl@debian.org>  Mon, 30 May 2011 18:40:12 +0200

rsyslog (5.8.0-1) unstable; urgency=low

  * New upstream stable release.

 -- Michael Biebl <biebl@debian.org>  Tue, 12 Apr 2011 14:34:57 +0200

rsyslog (5.7.10-1) unstable; urgency=low

  * New upstream release.
    - Properly handle ANSI SQL strings in ompgsql. (Closes: #600479)

 -- Michael Biebl <biebl@debian.org>  Tue, 29 Mar 2011 18:41:28 +0200

rsyslog (5.7.9-1) unstable; urgency=low

  * New upstream release.
  * debian/patches/02-pmaixforwardedfrom_type_nokeep.patch
    - Remove, merged upstream.
  * debian/patches/03-epoll_create1-fallback.patch
    - Remove, merged upstream.

 -- Michael Biebl <biebl@debian.org>  Sat, 26 Mar 2011 19:31:28 +0100

rsyslog (5.7.8-2) unstable; urgency=low

  * debian/patches/03-epoll_create1-fallback.patch
    - If epoll_create1() is not available during runtime, fall back to
      epoll_create(). This fixes remote syslog when runnig rsyslog on a
      lenny kernel. (Closes: #617996)

 -- Michael Biebl <biebl@debian.org>  Mon, 14 Mar 2011 12:13:14 +0100

rsyslog (5.7.8-1) unstable; urgency=low

  * New upstream release.
  * debian/rsyslog.links
    - Create symlink for rsyslog.service in multi-user.target.wants so rsyslog
      is enabled by default when using systemd.
  * debian/patches/02-pmaixforwardedfrom_type_nokeep.patch
    - Fix build failure in aixforwardedfrom parser module by setting the
      module type to NOKEEP.
  * debian/rsyslog.preinst
    - Remove old rsyslog.socket symlink from sockets.target.wants on upgrades
      as rsyslog uses syslog.socket now which is provided by systemd.
  * debian/rsyslog.install
    - Stop installing rsyslog.socket.

 -- Michael Biebl <biebl@debian.org>  Thu, 10 Mar 2011 08:50:29 +0100

rsyslog (5.7.6-1) unstable; urgency=low

  * New upstream release.

 -- Michael Biebl <biebl@debian.org>  Fri, 25 Feb 2011 17:14:46 +0100

rsyslog (5.7.5-1) unstable; urgency=low

  * New upstream release.
    - Fix regression in imuxsock plugin which did no longer sanitize received
      messages. This makes 02-cleanup-trailing-lf.patch obsolete and also
      fixes the SQL syntax errors in the mysql output if the input contained
      NUL bytes. Closes: #614061
  * Enable and install omprog output plugin. Closes: #552095
  * Improve package description. Closes: #612948
    Thanks to Justin B Rye for the patch.

 -- Michael Biebl <biebl@debian.org>  Wed, 23 Feb 2011 12:03:06 +0100

rsyslog (5.7.4-2) unstable; urgency=low

  * debian/patches/02-cleanup-trailing-lf.patch
    - Fix regression in imuxsock plugin which did not remove a trailing LF
      anymore. Patch cherry-picked from upstream Git. Closes: #612829

 -- Michael Biebl <biebl@debian.org>  Mon, 21 Feb 2011 12:04:13 +0100

rsyslog (5.7.4-1) unstable; urgency=low

  * New upstream release.
  * Enable and install parser modules.

 -- Michael Biebl <biebl@debian.org>  Sat, 19 Feb 2011 00:45:43 +0100

rsyslog (5.7.3-1) unstable; urgency=low

  * New upstream release.
  * Upload to unstable.
  * debian/patches/02-typo_fix_equation_sign.patch
    - Removed, merged upstream.
  * debian/patches/03-atomic_operations.patch
    - Removed, merged upstream.

 -- Michael Biebl <biebl@debian.org>  Wed, 09 Feb 2011 06:10:46 +0100

rsyslog (5.7.2-2) experimental; urgency=low

  * debian/patches/03-atomic_operations.patch
    - Fix build failures on platforms which don't have 64 bit atomic
      operations. Patch cherry-picked from upstream Git. Closes: #600930

 -- Michael Biebl <biebl@debian.org>  Wed, 01 Dec 2010 21:20:28 +0100

rsyslog (5.7.2-1) experimental; urgency=low

  * New upstream development release.
  * Remove patches, merged upstream
    - debian/patches/02-install_also_rsyslog_socket.patch
    - debian/patches/02-tls_loop_fix.patch
  * debian/patches/02-typo_fix_equation_sign.patch
    - Fix small typo ("equation sign"). Closes: #575589
  * debian/rsyslog.postinst
    - Remove pre-lenny migration code to rotate old log files from sysklogd.

 -- Michael Biebl <biebl@debian.org>  Tue, 30 Nov 2010 15:30:56 +0100

rsyslog (5.7.1-1) experimental; urgency=low

  * New upstream development release.
  * debian/rsyslog.install
    - Install omruleset.so plugin: http://www.rsyslog.com/doc/omruleset.html
  * debian/rsyslog.default
    - Start rsyslogd with native -c5 mode.
  * Install systemd unit files which allow to run rsyslog in socket activation
    mode when systemd is used.
  * debian/patches/02-install_also_rsyslog_socket.patch
    - When enabling rsyslog.service also enable rsyslog.socket. Patch
      cherry-picked from upstream Git.
  * Bump debhelper compatibility level to 8. Update Build-Depends accordingly.

 -- Michael Biebl <biebl@debian.org>  Wed, 20 Oct 2010 01:48:39 +0200

rsyslog (4.6.4-2) unstable; urgency=low

  * debian/patches/02-tls_loop_fix.patch
    - Fix bug in TLS handling which could cause rsyslog to loop in a tight
      loop and eating up all CPU and RAM resources. Closes: #549168
      Patch cherry-picked from upstream Git.

 -- Michael Biebl <biebl@debian.org>  Tue, 30 Nov 2010 14:50:15 +0100

rsyslog (4.6.4-1) unstable; urgency=low

  * New upstream release.
    - bugfix: programname filter in ! configuration can not be reset.
      Thanks to Kiss Gabor for the patch. Closes: #540807
  * Bump Standards-Version to 3.9.1. No further changes.

 -- Michael Biebl <biebl@debian.org>  Thu, 05 Aug 2010 18:35:37 +0200

rsyslog (4.6.3-1) unstable; urgency=low

  * New upstream release.
  * debian/patches/02-set-correct-default-for-buffered-writing.patch
    - Removed, merged upstream.
  * Switch to source format 3.0 (quilt).
    - Add debian/source/format.
    - Drop Build-Depends on quilt.
    - Remove debian/README.source.
    - Remove /usr/share/quilt/quilt.make include from debian/rules.
  * Switch to dh v7.
    - Bump Build-Depends on debhelper to (>= 7.0.50).
    - Bump Build-Depends on autotools-dev to (>= 20100122.1) for the
      autotools_dev dh addon.
    - Convert debian/rules to dh.
  * Bump Standards-Version to 3.9.0. Use Breaks instead of Conflicts as
    recommended by the new policy.

 -- Michael Biebl <biebl@debian.org>  Wed, 07 Jul 2010 19:07:03 +0200

rsyslog (4.6.2-1) unstable; urgency=low

  * New upstream release.
  * debian/patches/02-set-correct-default-for-buffered-writing.patch
    - The default for $OMFileFlushOnTXEnd was wrong ("off"). Patch pulled from
      upstream Git.

 -- Michael Biebl <biebl@debian.org>  Wed, 07 Apr 2010 16:42:56 +0200

rsyslog (4.6.1-1) unstable; urgency=low

  * New upstream release.
    - Fix error in rsyslog.conf(5) man page. The configuration variable
      $InputUDPServerRun does not exist, it should be $UDPServerRun instead.
      Thanks to Alexander Gerasiov for spotting this. Closes: #571202
  * debian/rsyslog-doc.install
    - Install png image files.
  * debian/patches/doc_typo_fix.patch
    - Removed, merged upstream.
  * debian/patches/no_create_db.patch
    - Refresh to apply cleanly.
  * debian/control
    - Bump Standards-Version to 3.8.4. No further changes.
  * debian/rsyslog.install
    - Install new lmstrmsrv.so and lmzlibw.so plugins.
  * debian/rsyslog.lintian-overrides
    - Add lintian override for init.d-script-missing-dependency-on-remote_fs
      false positive. See also the corresponding lintian bug: #571280.
  * debian/rules
    - Add call to dh_lintian.
  * debian/rsyslog.init
    - GNU/kFreeBSD does not allow to create pipes in /dev. So for xconsole
      create the pipe as /var/run/xconsole and a /dev/xconsole symlink.
      Closes: #537170

 -- Michael Biebl <biebl@debian.org>  Fri, 05 Mar 2010 01:07:53 +0100

rsyslog (4.4.2-2) unstable; urgency=low

  * debian/control
    - Demote mysql-server and postgresql from Recommends to Suggests. The
      server packages are not strictly necessary for dbconfig-common's
      autoconfiguration to work and one might want to use a remote server.
    - Add Recommends: mysql-client for rsyslog-mysql.
    - Add Recommends: postgresql-client for rsyslog-pgsql.
  * debian/patches/doc_typo_fix.patch
    - Fix a typo in the html documentation and man page regarding the syslog.h
      header file and the syslog(3) man page. Closes: #559334
      Thanks to Alexander Gerasiov for spotting this.

 -- Michael Biebl <biebl@debian.org>  Mon, 18 Jan 2010 15:31:40 +0100

rsyslog (4.4.2-1) unstable; urgency=low

  * New upstream release.

 -- Michael Biebl <biebl@debian.org>  Sat, 10 Oct 2009 14:08:16 +0200

rsyslog (4.4.1-1) unstable; urgency=low

  * New upstream release.
    - Fix invalid double-quoted PRI in log messages. Closes: #543505
  * debian/watch
    - Only check for stable upstream releases.
  * debian/patches/testbench-java.patch
    - Removed, merged upstream.

 -- Michael Biebl <biebl@debian.org>  Wed, 02 Sep 2009 17:19:05 +0200

rsyslog (4.4.0-1) unstable; urgency=low

  * New upstream release.
  * Removed patches
    - debian/patches/manpage_pidfile.patch (merged upstream)
    - debian/patches/close-stdout-stderr.patch (merged upstream)
  * Bump Standards-Version to 3.8.3. No further changes.
  * Disable testbench as it requires java.
  * debian/patches/testbench-java.patch
    - Move check_JAVA inside the ENABLE_TESTBENCH section so the tests are not
      run unless the testbench is enabled.

 -- Michael Biebl <biebl@debian.org>  Fri, 21 Aug 2009 23:08:45 +0200

rsyslog (4.2.0-2) unstable; urgency=low

  * debian/rsyslog.logcheck.ignore.server
    - Bring the logcheck rules up to date with the new SIGHUP log
      message. Thanks to Frédéric Brière for the patch. Closes: #537324
  * debian/patches/close-stdout-stderr.patch
    - Close stdout/stderr after forking. Closes: #537182
  * debian/control
    - Change Build-Depends: libmysqlclient15-dev → libmysqlclient-dev.
  * debian/rsyslog.postrm
    - Cleanup /lib/init/rw/sendsigs.omit.d/rsyslog upon remove to avoid false
      positives from piuparts. Closes: #539144

 -- Michael Biebl <biebl@debian.org>  Wed, 05 Aug 2009 01:12:09 +0200

rsyslog (4.2.0-1) unstable; urgency=low

  * New upstream release of the now stable v4 branch.
    - Fix warnings when /etc/rsyslog.d/ is empty. Closes: #530228
  * debian/patches/imudp_multiple_udp_sockets.patch
    - Removed, merged upstream.
  * debian/rsyslog.default
    - Set default compat mode to '4'.
  * debian/rsyslog.logcheck.ignore.server
    - Update logcheck rules files to also ignore rsyslogd and imklog stop
      messages.
  * debian/control
    - Bump Standards-Version to 3.8.2. No further changes.

 -- Michael Biebl <biebl@debian.org>  Tue, 23 Jun 2009 12:12:43 +0100

rsyslog (3.22.0-1) unstable; urgency=low

  * New upstream release.
  * debian/rsyslog.init
    - Pass proper return code to log_end_msg.
  * debian/rsyslog.conf
    - Set $Umask to 0022 to enforce that new log files or directories are
      always created with the right permissions. Closes: #522297
  * debian/patches/imudp_multiple_udp_sockets.patch
    - Fix a segfault in imudp when multiple udp listeners are configured.
      Patch cherry-picked from upstream git. Closes: #519073
  * debian/patches/manpage_pidfile.patch
    - Fix rsyslogd man page to point to the correct pid file. Closes: #526658

 -- Michael Biebl <biebl@debian.org>  Fri, 15 May 2009 23:25:14 +0200

rsyslog (3.20.5-1) unstable; urgency=low

  * New upstream release.
  * debian/rsyslog.logcheck.ignore.server
    - Install a logcheck ignore file for rsyslog (using dh_installlogcheck).
      Thanks to Kim Holviala for the patch. Closes: #522164

 -- Michael Biebl <biebl@debian.org>  Wed, 08 Apr 2009 00:59:14 +0200

rsyslog (3.20.4-3) unstable; urgency=low

  * Enable RELP (reliable event logging protocol) support.
  * debian/control
    - Add librelp-dev and pkg-config to Build-Depends.
    - Add new binary package rsyslog-relp.
    - Add rsyslog-relp to rsyslog's list of suggested packages.
  * debian/rules
    - Add --enable-relp to configure flags.
  * debian/rsyslog-relp.install
    - Install relp input and output plugin.
  * Bump Standards-Version to 3.8.1. No further changes.

 -- Michael Biebl <biebl@debian.org>  Mon, 23 Mar 2009 09:19:44 +0100

rsyslog (3.20.4-2) unstable; urgency=low

  * Merge changes from experimental branch.
  * Move Git repository to collab-maint. Update Vcs-* fields.

 -- Michael Biebl <biebl@debian.org>  Sun, 15 Feb 2009 21:56:23 +0100

rsyslog (3.20.4-1) experimental; urgency=low

  * New upstream release.
  * Merge changes from unstable branch.
  * debian/patches/message_locking_fix.patch
    - Removed, fixed upstream.
  * debian/compat
    - Bump to debhelper v7 compat mode.
  * debian/control
    - Bump debhelper build dependency to (>= 7.0.9).
    - Add rsyslog-gnutls and rsyslog-gssapi to Suggests.
    - Improve and update package description for rsyslog, rsyslog-gnutls and
      rsyslog-gssapi.
  * debian/rules
    - Use new dh_installinit "-R" (restart-after-upgrade) option.
    - Replace "dh_clean -k" with "dh_prep".
  * debian/rsyslog.postinst
    - Remove our custom code to stop/start rsyslog on upgrades. This is done
      now automatically by dh_installinit.
  * debian/rsyslog.docs
    - Install AUTHORS file.

 -- Michael Biebl <biebl@debian.org>  Tue, 10 Feb 2009 01:52:32 +0100

rsyslog (3.20.3-1) experimental; urgency=low

  * New upstream release.
  * debian/patches/allowed_sender_reload.patch
    - Removed, merged upstream.
  * debian/patches/manpage_fixes.patch
    - Removed, merged upstream.

 -- Michael Biebl <biebl@debian.org>  Mon, 19 Jan 2009 13:52:31 +0100

rsyslog (3.20.2-1) experimental; urgency=low

  * New upstream release.
  * Refresh all patches for the new upstream stable branch.
  * Enable GSSAPI support
    - Add libkrb5-dev to Build-Depends.
    - Split files into a separate package named rsyslog-gssapi.
    - Add --enable-gssapi-krb5 to configure flags.
    Thanks to Ben Poliakoff for the patch. Closes: #493044
  * Enable GnuTLS support
    - Add libgnutls-dev to Build-Depends.
    - Split files into a separate package named rsyslog-gnutls.
    - Add --enable-gnutls to configure flags.
  * debian/control
    - Add ${misc:Depends} to rsyslog-doc.
  * Let rsyslog collect messages as long as possible during shutdown or
    reboot. As /usr may be mounted via NFS, the latest possible point is just
    before umountnfs. Closes: #474498
    - Update the stop priorities for runlevel 0 and 6 from K90 to S30 for
      sysv-rc and migrate existing symlinks.
    - Update LSB header to stop after sendsigs and before umountnfs.
    - Use the sendsigs process omission interface to avoid being killed by
      killall5.
  * debian/rsyslog-doc.links
    - There is an upstream index.html file now, so we no longer need to create
      a symlink.

 -- Michael Biebl <biebl@debian.org>  Fri, 16 Jan 2009 22:23:40 +0100

rsyslog (3.18.6-4) unstable; urgency=medium

  * debian/patches/message_locking_fix.patch
    - Proper message locking on message destruct to avoid a race condition
      which could lead to a segfault. Closes: #509292
      Patch cherry-picked from upstream git.
  * Urgency medium for the RC bug fix.
  * Use the dbconfig-common template mechanism to generate the configuration
    files for rsyslog-mysql and rsyslog-pgsql. This not only simplifies
    postinst quite a bit, but also makes sure we don't read any unset debconf
    values. Closes: #513589
  * debian/README.Debian
    - Add notes about the Debian specific configuration of rsyslog and outline
      some of the changes between rsyslog and sysklogd which should ease the
      migration. Closes: #484083
    - Add instructions how to avoid doubled hostname entries when sending
      syslog messages from rsyslog to a sysklogd server. Closes: #512663

 -- Michael Biebl <biebl@debian.org>  Sun, 08 Feb 2009 00:54:39 +0100

rsyslog (3.18.6-3) unstable; urgency=medium

  * debian/rsyslog.conf
    - Create new directories with more sane permissions. Closes: #511054
  * debian/rsyslog.init
    - Update the LSB header to not provide the reserved 'syslog' facility. Use
      'rsyslog' instead to avoid clashes. Thanks to Petter Reinholdtsen for
      the hint.
  * debian/patches/allowed_sender_reload.patch
    - Fix segfault on reload when using $AllowedSender. Closes: #511562
      Patch cherry picked from upstream git.

 -- Michael Biebl <biebl@debian.org>  Thu, 15 Jan 2009 17:50:06 +0100

rsyslog (3.18.6-2) unstable; urgency=low

  * debian/rsyslog.postinst
    - Use $(($var)) syntax for arithmetic expressions, as dash from etch is
      not SUSv3 compliant in that regard which leads to failing dist upgrades
      when dash is used as /bin/sh. Closes: #508943

 -- Michael Biebl <biebl@debian.org>  Wed, 17 Dec 2008 00:29:43 +0100

rsyslog (3.18.6-1) unstable; urgency=high

  * New upstream bugfix release.
    - Fix "$AllowedSender" security bypass vulnerability. The "$AllowedSender"
      configuration directive was not respected, allowing unrestricted network
      access to the application. Closes: #508027
      No CVE id yet.
  * Urgency high for the security fix.
  * debian/patches/manpage_fixes.patch
    - Fix typos in rsyslogd man page. Closes: #506925
      Thanks to Geoff Simmons for the patch.

 -- Michael Biebl <biebl@debian.org>  Fri, 12 Dec 2008 17:36:02 +0100

rsyslog (3.18.5-1) unstable; urgency=low

  * New upstream bugfix release.
    - Fix potential segfault in imfile on rsyslogd HUP (reload) and
      termination (stop). Closes: #503940
    - Disable input throttling for imuxsock as this can lead to denial of
      service. Closes: #505991
  * debian/rsyslog-{mysql,pgsql}.config
    - Do not ignore errors in config maintainer scripts.
  * debian/rsyslog.postinst
    - Rotate old .0 log files when migrating from sysklogd. Closes: #491672
  * debian/rules
    - Exclude sample conf file from being compressed as it is referenced in
      the html documentation with the non-compressed file name.
    - Depend on $(QUILT_STAMPFN) instead of patch; patch is a phony target and
      thus always out of date.
    - Move $(QUILT_STAMPFN) dependency to config.status to avoid potential
      issues with parallel make.
  * debian/rsyslog-doc.links
    - Add a symlink index.html pointing at manual.html. Closes: #494634
  * debian/rsyslog.default
    - Fix a few spelling errors.
  * Disable the logrotate file when removing the package to avoid log
    rotation failures. Closes: #500569
    Thanks to Kobayashi Noritada for the patch
  * debian/rsyslog.postrm
    - Rename /etc/logrotate.d/rsyslog to /etc/logrotate.d/rsyslog.disabled
      when removing the package.
    - Remove /etc/logrotate.d/rsyslog.disabled when purging and replacing
      the package.
  * debian/rsyslog.preinst
    - Rename /etc/logrotate.d/rsyslog.disabled to /etc/logrotate.d/rsyslog
      when reinstalling.

 -- Michael Biebl <biebl@debian.org>  Thu, 20 Nov 2008 14:09:10 +0100

rsyslog (3.18.2-1) unstable; urgency=low

  * New upstream release.
  * debian/rsyslog.init
    - Restore default SELinux security context when creating /dev/xconsole.
      Closes: #493171
    - Add "status" action.
  * debian/control
    - Bump dependency on lsb-base to >= 3.2-14, which provides status_of_proc.

 -- Michael Biebl <biebl@debian.org>  Mon, 11 Aug 2008 00:25:33 +0200

rsyslog (3.18.1-1) unstable; urgency=low

  * New upstream release. Closes: #490445
    - List Debian in doc/rsyslog_packages.html. Closes: #488870
    - Fix compilation of imklog module on GNU/kFreeBSD. Closes: #491193
  * debian/rsyslog-doc.install
    - Install the example config file. Closes: #488860
  * debian/rules
    - Enable mail output plugin.
    - Make sure all directories are created by calling dh_installdirs for both
      binary-arch and binary-indep. Closes: #491459
  * debian/rsyslog.install
    - Install mail output plugin (ommail.so).
  * debian/control
    - Add Suggests www-browser to rsyslog-doc as the package contains mostly
      html documents.
    - Update feature list.
    - Adjust priorities, set rsyslog priority to important.

 -- Michael Biebl <biebl@debian.org>  Wed, 23 Jul 2008 02:22:32 +0200

rsyslog (3.16.2-1) unstable; urgency=low

  * New upstream release.

 -- Michael Biebl <biebl@debian.org>  Wed, 25 Jun 2008 15:41:21 +0200

rsyslog (3.16.1-2) unstable; urgency=low

  * debian/rules
    - Build the doc package in binary-indep.
  * Bump Standards-Version to 3.8.0.
    - Add debian/README.source as recommended by the new policy.

 -- Michael Biebl <biebl@debian.org>  Fri, 20 Jun 2008 07:11:24 +0200

rsyslog (3.16.1-1) unstable; urgency=low

  * New upstream release.
    - Fixes a segfault in the imklog input plugin. Closes: #479117

 -- Michael Biebl <biebl@debian.org>  Sat, 03 May 2008 09:59:59 +0200

rsyslog (3.14.2-3) unstable; urgency=low

  * debian/rsyslog-doc.install
    - Fix a typo in the install path of the dia files. Closes: #477489
      Thanks to Justin B Rye for the patch.

 -- Michael Biebl <biebl@debian.org>  Wed, 23 Apr 2008 16:46:39 +0200

rsyslog (3.14.2-2) unstable; urgency=low

  * debian/rsyslog.conf
    - Disable high precision timestamps until other affected packages have
      been updated to support them. See bug #475303 for details.

 -- Michael Biebl <biebl@debian.org>  Tue, 22 Apr 2008 20:02:28 +0200

rsyslog (3.14.2-1) unstable; urgency=low

  * New upstream release.

 -- Michael Biebl <biebl@debian.org>  Thu, 10 Apr 2008 08:32:23 +0200

rsyslog (3.14.1-1) unstable; urgency=low

  * First upstream release of the new stable v3 series.
  * debian/copyright
    - Update copyright notice as rsyslog has been relicensed under GPL3+.
  * debian/rsyslog.init
    - The kernel logging functionality is now implemented via an input plugin
      and has replaced the separate rklogd binary. Remove all traces of rklogd
      from the init script.
    - General cleanup and simplification.
  * debian/rsyslog.default
    - Remove obsolete RKLOGD_OPTIONS configuration variable.
    - Document deprecated command line options.
    - Start rsyslogd in v3 compat mode, its native interface.
  * debian/rsyslog.conf
    - Load the input modules imuxsock (local system logging) and imklog
      (kernel logging) by default.
  * debian/rsyslog-doc.install
    - Install jpeg images and dia files.
  * debian/rsyslog.install
    - Install input modules (im*.so) and library plugins (lm*.so).
  * debian/rules
    - Enable imfile input plugin.
    - Use dh_installinit "-r" (no-restart-on-upgrade) option.
  * debian/rsyslog.postinst
    - Minimize downtime by restarting rsyslog in postinst instead of stop in
      prerm and start in postinst. Closes: #471051
  * debian/rsyslog.logrotate
    - Group together related log files.
    - Rotate daemon.log and kern.log weekly, to match sysklogd behaviour.
    - Add options "missingok", "delaycompress" and "sharedscripts" as
      suggested by Paul Slootman. Closes: #473546

 -- Michael Biebl <biebl@debian.org>  Sun, 06 Apr 2008 16:54:08 +0200

rsyslog (2.0.4-1) unstable; urgency=low

  * New upstream release.
  * debian/control
    - Add Vcs-Git and Vcs-Browser fields.

 -- Michael Biebl <biebl@debian.org>  Sat, 29 Mar 2008 12:17:22 +0100

rsyslog (2.0.3-1) unstable; urgency=low

  * New upstream release.
  * debian/patches/man_page_format.patch
    - Removed, merged upstream.

 -- Michael Biebl <biebl@debian.org>  Thu, 13 Mar 2008 14:22:35 +0100

rsyslog (2.0.2-2) unstable; urgency=low

  * debian/rsyslog-doc.doc-base
    - Update the Section: field to comply with the new doc-base Manual.
  * debian/rules
    - Don't install rfc3195d and its man page. The rfc3195d binary is
      currently only a dummy.
  * debian/rsyslog.conf
    - Fix the path to the rsyslog documentation which is now in rsyslog-doc.
    - Set the default permissions of new log files to 0640 and make them
      readable by group adm.
    - Include external config files at the beginning. This allows to drop log
      messages before they end up in the standard log files.

 -- Michael Biebl <biebl@debian.org>  Thu, 06 Mar 2008 02:49:17 +0100

rsyslog (2.0.2-1) unstable; urgency=low

  * New upstream release.
  * debian/rsyslog.init
    - Make /dev/xconsole readable by group adm. Closes: #464695
  * debian/control
    - Fix a typo in the rsyslog-pgsql package description.
  * debian/patches/man_page_format.patch
    - Fix a few format errors in the man pages.

 -- Michael Biebl <biebl@debian.org>  Tue, 12 Feb 2008 19:56:47 +0100

rsyslog (2.0.1-2) unstable; urgency=low

  * debian/control
    - Drop Replaces: system-log-daemon, linux-kernel-log-daemon. There are no
      conflicting files with other syslog packages so this line is not needed.
    - Add new package rsyslog-doc.
    - Add Suggests: rsyslog-doc to rsyslog.
  * debian/rsyslog.install, debian/rsyslog-doc.install
    - Move the html files from rsyslog to rsyslog-doc.
  * debian/rsyslog-doc.doc-base
    - Integrate the documentation with doc-base.

 -- Michael Biebl <biebl@debian.org>  Sat, 02 Feb 2008 17:00:49 +0100

rsyslog (2.0.1-1) unstable; urgency=low

  * New upstream bug fix release.

 -- Michael Biebl <biebl@debian.org>  Thu, 24 Jan 2008 18:35:20 +0100

rsyslog (2.0.0-2) unstable; urgency=low

  * debian/rsyslog.init
    - Fix LSB init header. Use $remote_fs instead of $local_fs as the rsyslogd
      daemon requires /usr to be mounted.

 -- Michael Biebl <biebl@debian.org>  Thu, 10 Jan 2008 13:22:42 +0100

rsyslog (2.0.0-1) unstable; urgency=low

  * New upstream release of the stable branch of rsyslog v2.

 -- Michael Biebl <biebl@debian.org>  Wed, 02 Jan 2008 15:39:19 +0100

rsyslog (1.21.2-1) unstable; urgency=low

  * New upstream release.

 -- Michael Biebl <biebl@debian.org>  Sun, 30 Dec 2007 02:11:58 +0100

rsyslog (1.21.1-1) unstable; urgency=low

  * New upstream release.

 -- Michael Biebl <biebl@debian.org>  Sun, 23 Dec 2007 19:02:11 +0100

rsyslog (1.21.0-1) unstable; urgency=low

  * New upstream release.
  * debian/patches/ignore_non_conf_files.patch
    - Dropped. A more powerful alternative has been implemented upstream which
      allows to include configuration files based on wildcards.
  * debian/rsyslog.conf
    - Include all configuration files matching /etc/rsyslog.d/*.conf.

 -- Michael Biebl <biebl@debian.org>  Wed, 19 Dec 2007 09:54:18 +0100

rsyslog (1.20.1-1) unstable; urgency=low

  * New upstream release.
  * debian/rules
    - Enable the PostgreSQL database support.
    - Use "install -D" to install the SQL schema file for MySQL and
      PostgreSQL.
  * debian/control
    - Add a Build-Depends on libpq-dev for the PostgreSQL support.
    - Add the binary package rsyslog-pgsql.
  * debian/patches/no_create_db.patch
    - Updated. Only setup the tables. Leave the database creation to
      dbconfig-common.
  * debian/rsyslog-pgsql.install
    - Install the ompgsql.so plugin.
  * debian/rsyslog-pgsql.config
    - Preseed the default values for dbconfig-common, database name is
      "Syslog", database user "rsyslog".
  * debian/rsyslog-pgsql.{postinst,prerm,postrm}
    - Use dbconfig-common to setup the PostgreSQL database.
    - Generate a configuration file /etc/rsyslog.d/pgsql.conf with the values
      provided by dbconfig-common and use ucf and ucfr to manage this file.
  * debian/rsyslog-mysql.postinst
    - Use the new ":ommysql:" output selector instead of ">".
  * debian/rsyslog-mysql.install
    - Only install the ommysql.so plugin.

 -- Michael Biebl <biebl@debian.org>  Wed, 12 Dec 2007 20:54:41 +0100

rsyslog (1.19.12-1) unstable; urgency=low

  * New upstream release.
  * debian/control
    - Add Depends: lsb-base (>= 3.0-6) as the init script uses the LSB logging
      functions.
    - Bump Standards-Version to 3.7.3. No further changes required. 

 -- Michael Biebl <biebl@debian.org>  Mon, 03 Dec 2007 19:42:19 +0100

rsyslog (1.19.10-1) unstable; urgency=low

  * New upstream release.
  * debian/patches/man_page_format.patch
    - Removed, merged upstream.

 -- Michael Biebl <biebl@debian.org>  Fri, 19 Oct 2007 17:21:49 +0200

rsyslog (1.19.9-1) unstable; urgency=low

  * New upstream release.
  * debian/patches/udp_msg_reception.patch
    - Deleted, merged upstream.
  * The mysql output plugin is now in a separate subdirectory. Change the
    path to the createDB.sql script accordingly.

 -- Michael Biebl <biebl@debian.org>  Sun, 14 Oct 2007 11:55:12 +0200

rsyslog (1.19.7-2) unstable; urgency=low

  * debian/patches/udp_msg_reception.patch
    - Pull patch from CVS which fixes broken UDP message reception.
  * debian/control
    - Use the new "Homepage:" field to specify the upstream URL.

 -- Michael Biebl <biebl@debian.org>  Fri, 28 Sep 2007 15:30:06 +0200

rsyslog (1.19.7-1) unstable; urgency=low

  * New upstream release.
  * debian/patches/man_page_format.patch
    - Fix a formatting glitch in the rsyslog.conf man page.

 -- Michael Biebl <biebl@debian.org>  Tue, 25 Sep 2007 22:54:04 +0200

rsyslog (1.19.3-1) unstable; urgency=low

  * New upstream release.

 -- Michael Biebl <biebl@debian.org>  Sun, 02 Sep 2007 20:15:02 +0200

rsyslog (1.19.2-1) unstable; urgency=low

  * New upstream release.

  * Enable the mysql output plugin and split it into a separate binary package
    named rsyslog-mysql. Use the dbconfig-common framework to handle the
    database administration. Generate a configuration file
    /etc/rsyslog.d/mysql.conf with the values provided by dbconfig-common and
    use ucf to manage this file.
  * debian/control
    - Add a build dependency on quilt and libmysqlclient15-dev.
    - Add the binary package rsyslog-mysql.
    - Add Suggests: rsyslog-mysql to the rsyslog package.
  * debian/rules
    - Include the quilt makefile and add calls to the patch/unpatch targets.
    - Pass --enable-mysql to ./configure.
    - Install the SQL schema file for dbconfig-common.
  * debian/rsyslog-mysql.config
    - Setup the default values for dbconfig-common. 
  * debian/rsyslog-mysql.{postinst,prerm,postrm}
    - Include the dbconfig-common scripts and call the dbc_go function.
    - Use ucf and ucfr to manage the generated configuration file mysql.conf.
  * debian/patches/ignore_non_conf_files.patch
    - Let rsyslog ignore all configuration files not ending with *.conf.
  * debian/patches/no_create_db.patch
    - The database creation is handled by dbconfig-common so we only need the
      createDB.sql SQL schema file for setting up the tables.
  * debian/patches/series
    - Added, needed by quilt. Include the two patches above.
  * debian/rsyslog-mysql.dirs
    - Create the install directory for the SQL schema file.
  * debian/rsyslog-mysql.install
    - Install the mysql output plugin ommysql.so.

 -- Michael Biebl <biebl@debian.org>  Sun, 02 Sep 2007 18:39:47 +0200

rsyslog (1.19.1-1) unstable; urgency=low

  * New upstream release.

 -- Michael Biebl <biebl@debian.org>  Mon, 27 Aug 2007 19:17:14 +0200

rsyslog (1.18.2-1) unstable; urgency=low

  * Initial release. Closes: #435884

 -- Michael Biebl <biebl@debian.org>  Mon, 13 Aug 2007 19:20:48 +0200